LED assembly line,Assembly Line Manufacturers LED Ceiling Light Assembly Line

No

Name

Specifications

Quantity

1

Drive system

1.1HP Motor,reducer casing:70 tooth box;The nose and tail

made of steel,stabilize,the motor and is difficult loose;

2.Speed:0-0.6m/min,2HP inventer control the speed,frequency control.safe and low noise;

3.  Active roller 6 inch *350mm, Driven roller 3 inch*350mm;

1Set

2

The line body structure

1. stand is made of40*40 Iron FangTong, working face height :720+/-20mm;

2. Normal screwed connection,remove many move no damage.dismounting convenient,stable and no transformation;

3. both sides of the line is made of 0*60 aluminum,no pollution the product;

4. Green2*400PVC convey belt is produced in Netherlands,seamless connection,the workbench adopt anti-static rubber,Grandseed brand can test in 2 years; design Static wire down of the workbench

5. Feed belt adopt galvanized plate support,25*400 galvanized support roller transportation belt every meter,no deformation,be sure the transport stable;

6. The power is adopt galvanized trunking the line is 2.5mm ;every station fix 220V three holes a bar socket;

7.The standalone workbench normal:Total 12 Tables.platen 1200mm*600mm,the table adopt 16mm board,green Anti-static rubber stuck in table-board, Half a log overlock ;stand is made of 30*30* Iron FangTong, working face   height :720+/-20mm;

8. The SOP holder standard:300/220mm,each station have a A4 process card;

9. The lamp holder fix 30*28 the wind group of aluminum

10. Instrument desk: wide 350mm,table-board is adopted

16mm board,the surface stick White fire prevention board,Half logs overlock.,the stand adopt 40*40 Iron FangTong

10m

3

Lighting design

1.28W/T5 energy saving lamp with cover,each lamp have a control switch.the testing luminance 368Lux.lined with each two sides  the lamp adopted 25*50mm Iron flat